News Center
News dynamics
Installation and service life of air filters
Release time:
2024-02-07
1. product characteristics and uses
Ordinary high efficiency air filter is a kind of air filtration equipment in the clean system, which can filter the particles with a particle size of 0.3 μm in the air with an efficiency of more than 99.99%. Mainly used in electronics, medicine, food, precision instruments and other high cleanliness industry. Its transportation and installation must be carried out in strict accordance with this requirement to ensure that the filter can be used correctly and reasonably.
2. handling and storage
1. In the process of transportation, it must be transported in the diagonal direction of the box. The carrier should be careful to prevent the filter from sliding and damaging the filter screen during handling.
No external force of more than 20kg can act on the filter. During handling, hands and other objects must not collide with the filter material, such as accidentally touching the filter material, even if there is no visual damage, should be scanned again.
3, the storage location should be temperature, humidity difference is small, clean, dry and good ventilation system environment.
If the storage period is more than three years, it shall be retested.
3. installation and adjustment
1. The air filter should be installed in a normal temperature, normal pressure and normal humidity environment. If the working conditions are bad, the life of the filter will be shortened, and even the filter will not work normally after installation. Before installation, check whether the appearance of the filter is deformed, damaged, and whether the filter material is damaged. If the above situation is found, contact the company in time.
During the installation process, we must pay attention to the sealing between the filter and the installation frame (or box). In order to ensure the sealing performance of the filter and the installation box, it is recommended to use the sealing gasket provided by our company.
3. When replacing the filter, the static pressure box or the inner wall of the air supply pipe must be completely wiped clean to prevent the rust and dust particles on the wall of the box from falling on the filter and causing damage to the filter material.
4. Be sure to pay attention to the airflow direction of the filter during installation, and install it according to the upwind mark "" on the filter label. The direction of the arrow is the air outlet surface of the filter.
5. During installation, hold the surrounding frame with your hands and slowly move it into the air supply outlet. Do not hold the filter material with your hands and head, so as not to break the filter material and affect the filtration efficiency.
During installation, hold the surrounding frame with your hands and slowly move it into the air supply outlet. Do not hold the filter material with your hands and head to avoid the filter material breaking and affecting the filtration efficiency.